Ceramic Filamet™ Sample

Overview

Create real ceramic parts using any open-architecture FFF/FDM 3D printer—or even a 3D printing pen.

1.75mm and 2.85mm diameters in 100g weight

By Mass Recommended Nozzle Filament Density (g/cc) Aluminum Oxide 61.0% ± 2.0 0.6mm Hardened Steel 1.50 – 1.65 Basalt Moon Dust 61.0% ± 1.0 0.6mm Hardened Steel 1.60 – 1.75 Magnetite 78.5% ± 2.5 0.6mm Hardened Steel Porcelain 50.0% ± 2.0 0.6mm Hardened Steel 1.40 – 1.50 Rapid 3DShield Boron Carbide 62.5% ± 2.5 0.6mm Hardened Steel 1.30 – 1.50 Silicon Carbide 65.5% ± 2.5 0.6mm Hardened Steel 1.88 – 1.95 Zirconium Silicate (Zircopax®) 62.5% ± 2.5 0.6mm Hardened Steel 2.10 – 2.19 Some samples are packaged spooless.

Works with virtually any open-architecture 3D printer—no proprietary hardware or specialized equipment required. Also compatible with 3D printing pens.

👉 Our list of Trusted 3D Printers – Click Here

👉 More information on printing – Click Here

Most of our ceramic filaments are fully sinterable. After printing, your part can be fired in a furnace to become 100% ceramic .

👉 Debinding & Sintering Instructions for tested materials – Click Here

👉 Research Papers – Click Here

All materials print just like PLA on most open-architecture 3D printers.

Recycle empty spools with the spool buy-back program – Click Here

Highlights

• Prints similar to PLA
• Minimal to no warping
• Ensure the filament feeds straight into the extruder
• Less hygroscopic than PLA
• Do not dry this filament—drying will degrade the binder